Turnout Control

 


Qty.- Model Manufacturer Product Image Item Name Price
38 800-6000 Circuitron Switch machine, slow motion, "Tortoise"

Switch machine, slow motion, "Tortoise"

Easy wiring. Linkage included. Two sets of SPDT auxilliary contacts provided. If not shown in stock, please allow 1-2 weeks for delivery. Note that...
$25.18

Add:

6 TAM-HFJ003U Tam Valley Depot Automatic polarity reverser "Hex Frog Juicer", 6 frogs

Automatic polarity reverser "Hex Frog Juicer", 6 frogs

For 2A to 8A DCC systems, including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser...
$95.70

Add:

6 TAM-TURT01 Tam Valley Depot Driver "Turtle", stall motor, turnout

Driver "Turtle", stall motor, turnout

Includes board and mounting kit. For local control you will also need a fascia controller. For connecting to a motor the options are to use the...
$16.70

Add:

6 552-PL-10 Peco Motor, turnout, under-table

Motor, turnout, under-table

If not shown in stock, please allow 1-2 weeks for delivery. Note that the price may change due to exchange rate fluctuations.
$11.75

Add:

6 552-PL-9 Peco Mounting plate, motor (x5)

Mounting plate, motor (x5)

Pack of five plates, with fixing screws, for PL-10 series turnout motors. If not shown in stock, please allow 1-2 weeks for delivery. Note that the...
$5.25

Add:

5 TAM-MFJ003U Tam Valley Depot Automatic polarity reverser "Mono Frog Juicer", 1 frog

Automatic polarity reverser "Mono Frog Juicer", 1 frog

For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to...
$17.89

Add:

5 TAM-FCB020RG Tam Valley Depot Fascia controller, red/green

Fascia controller, red/green

Plug the fascia controller in to servo controllers to both actuate the board and to indicate its status. There are four optional colours available....
$5.38

Add:

5 TAM-MFC001 Tam Valley Depot Mount, fascia controller

Mount, fascia controller

Made of precision 1/8" thick laser-cut acrylic, these mounts can be used to neatly mount your fascia controllers. Simply use a 1-3/8" hole...
$4.18

Add:

5 800-6100 Circuitron Mounting bracket/linkage, "Tortoise"

Mounting bracket/linkage, "Tortoise"

To mount the "Tortoise" switch machine above or below benchwork. If not shown in stock, please allow 1-2 weeks for delivery. Note that for...
$18.60

Add:

5 800-6006 Circuitron Switch machine, slow motion, "Tortoise" (x6)

Switch machine, slow motion, "Tortoise" (x6)

Easy wiring. Linkage included. Two sets of SPDT auxilliary contacts provided. Pack of six. If not shown in stock, please allow 1-2 weeks for...
$144.84

Add:

4 800-6012 Circuitron Switch machine, slow motion, "Tortoise" (x12)

Switch machine, slow motion, "Tortoise" (x12)

Easy wiring. Linkage included. Two sets of SPDT auxilliary contacts provided. Pack of twelve. If not shown in stock, please allow 1-2 weeks for...
$274.31

Add:

3 552-PL-12 Peco Adaptor base, turnout motor, w/spring

Adaptor base, turnout motor, w/spring

The PL-12 Adaptor Base should be used in association with most non-PECO turnouts, where the over-centre spring feature is not available. It can be...
$4.95

Add:

3 TAM-DFJ003U Tam Valley Depot Automatic polarity reverser "Dual Frog Juicer", 2 frogs

Automatic polarity reverser "Dual Frog Juicer", 2 frogs

For all DCC systems including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a...
$43.04

Add:

3 800-6190 Circuitron Drilling template, "Tortoise"

Drilling template, "Tortoise"

If not shown in stock, please allow 1-2 weeks for delivery. Note that for backorders or preorders the price may change due to exchange rate...
$8.74

Add:

3 552-PL-11 Peco Motor, turnout, side mounted

Motor, turnout, side mounted

If not shown in stock, please allow 1-2 weeks for delivery. Note that the price may change due to exchange rate fluctuations.
$15.75

Add:

3 552-PL-10E Peco Motor, turnout, under-table, w/extended pin

Motor, turnout, under-table, w/extended pin

If not shown in stock, please allow 1-2 weeks for delivery. Note that the price may change due to exchange rate fluctuations.
$11.75

Add:

3 BUI-1001 Builders In Scale Switch machine, "SwitchMaster"

Switch machine, "SwitchMaster"

Includes the proven Hankscraft Series 3440 d.c. gearhead motor, linkage and hardware, mounting template and instructions. Easy to install and...
$26.28

Add:

3 552-PL-13 Peco Switch, accessory, turnout motor

Switch, accessory, turnout motor

Simple, inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for frog polarity, signals etc....
$5.75

Add:

2 552-PL-15 Peco Micro switch kit, twin

Micro switch kit, twin

For fitting to PL-10. Easy-to-assemble unit with two micro switches to control the polarity of live frogs whilst simultaneously operating panel...
$13.25

Add:

2 525-6003 Miscellaneous Mounting kit, under table, for switch machine (x2)

Mounting kit, under table, for switch machine (x2)

Manufactured by NJ International. For switch machine #6000. Only the quantity shown in stock is currently available.
$6.30

Add:



Monthly Specials For March

Switch machine, twin coil
Switch machine, twin coil
$18.95  $12.95
Save: 32% off

Copyright © 2019 Canadian Express Line Store. Powered by Zen Cart